Firmware Pages and Descriptions
89
7" Modero Widescreen Touch Panels
Panel Information PageThe Panel Information page (FIG. 79) centers around Modero panel properties such as: resolution used, on-board memory, firmware, address/channel information, and string information. The elements of the Panel Information page are described in the table below: Project Information Page Elements (Cont.)
AMX IR 455k
Assigned Port:
Displays the AMX 455 kHz IR channel port used by the IR receiver on the
panel.
This information is pulled by the panel from AMX IR Receivers section of the
TPD4 Project Properties > IR Emitters & Receivers tab.
• For IR reception, this is the port that reports a push on for the corresponding
IR code.
• IR receivers and transmitters on G4 panels share the device address number
of the panel.
Build Number: Displays the build number information of the TPD4 software used to create the
project file.
Creation Date: Displays the project creation date.
Revision Date: Displays the last revision date for the project.
Last Save Date: Displays the last date the project was saved.
Blink Rate: Displays the feedback blink rate (10th of second).
Job Comments: Displays any comments associated to the job. These comments are taken from
the TPD4 project file.
FIG. 79 Panel Information page (takes its’ information from the touch panel)
Panel Information Page Elements
Back: Returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Panel Type: Displays the model of the Modero panel being used.
Firmware Version: Displays the G4 firmware version being used by the panel.
• Verify you have the latest version from www.amx.com.
This information is retrieved
from the Modero panel