AMX NXD-CV7, NXT-CV7 instruction manual Secondary Connection Page Elements

Firmware Pages and Descriptions

					IP Settings section
					Wireless Settings section
				Red fields are user-editable
				Blue fields cycle through choices
				Grey fields are read-only
				Changes on this page
				take effect after using
				the BACK button to
				return to the previous
				page
FIG. 93 Secondary Connection page (showing default values)
The elements of the Secondary Connection page are described in the table below:
	Secondary Connection Page Elements
	Back:	Saves the changes and returns you to the previously active touch panel page.
	Connection Status icon:	This visual display of the connection status allows the user to have a current
		visual update of the panel’s connection status regardless of what page is
		currently active.
		• A Lock only appears on the icon if the panel has established a connection
		with a currently secured target Master (requiring a username and password).
	IP Settings:	Sets the IP communication values for the touch panel and contains:
	DHCP/STATIC	Sets the panel to either DHCP or Static communication modes.
		• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses to client
		stations logging onto a TCP/IP network from a DHCP server.
		• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP
		network.
		Note: If DHCP is selected, the following fields become read-only: IP Address,
		Subnet Mask, Gateway, Primary DNS, Secondary DNS, and Domain.
	IP Address	Sets the secondary IP Address assigned to the panel.
	Subnet Mask	Sets a subnetwork address to the panel.
		• Subnetwork mask is the technique used by the IP protocol to filter messages
		into a particular network segment (subnet).
	Gateway	Sets a gateway value to the panel.
		• Gateway is a computer that either performs protocol conversion between
		different types of networks/applications or acts as a go-between for two or
		more networks that use the same protocols.
	Host Name	Sets the host name of the panel.
		• PRIMARY DNS sets the address of the primary DNS server being used by the
		Modero panel for host name lookups.
		- DNS (Domain Name System) is software that lets users locate computers
			on a local network or the Internet (TCP/IP network) by host and domain. The
			DNS server maintains a database of host names for its’ domain and their
			corresponding IP Addresses.
		• SECONDARY DNS sets the secondary DNS value to the panel.
	Primary DNS	Sets the address of the primary DNS server used by the panel for host name
		lookups.
	Secondary DNS	Sets the secondary DNS value to the Modero panel.
	Domain	Sets the unique name on the Internet to the panel for DNS look-up.
	MAC Address	This value is factory set by the manufacturer of the wireless Ethernet card.

106 7" Modero Widescreen Touch Panels