AMX NXD-CV7, NXT-CV7 instruction manual Panel Setup Commands

Programming

Panel Setup Commands

These commands are case insensitive.

Panel Setup Commands

^MUT Syntax:

Set the panel	"'^MUT-<mute state>'"
mute state.	Variable:
	mute state= 0 = Mute Off and 1 = Mute On.
	Example:

	SEND_COMMAND Panel,"'^MUT-1''"
	Sets the panel’s master volume to mute.
@PWD	@PWD sets the level 1 password only.
Set the page flip	Syntax:
password.	"'@PWD-<page flip password>'"
	Variables:
	page flip password = 1 - 50 ASCII characters.
	Example:
	SEND COMMAND Panel,"'@PWD-Main'"
	Sets the page flip password to 'Main'.
^PWD	Password level is required and must be 1 - 4.
Set the page flip	Syntax:
password.	"'^PWD-<password level>,<page flip password>'"
	Variables:
	password level = 1 - 4.
	page flip password = 1 - 50 ASCII characters.
	Example:
	SEND COMMAND Panel,"'^PWD-1,Main'"
	Sets the page flip password on Password Level 1 to 'Main'.
^VOL	Syntax:
Set the panel	"'^VOL-<volume level>'"
volume.	Variable:
	volume level = 0 - 100. 100 is maximum volume setting.
	Example:
	SEND_COMMAND Panel,"'^VOL-50'"
	Set the panel volume to 50.

160 7" Modero Widescreen Touch Panels