AMX NXT-CV7, NXD-CV7 instruction manual Accessing the NetLinx Master via an IP Address

Configuring Communication

12.From the Web Password keyboard, enter a unique alpha-numeric string to be assigned as the G4 Authentication session password associated with VNC web access of this panel.

13.Press Done after you are finished assigning the alpha-numeric string for the Web Control password.

14.Press the Web Control Port field to open the Web Port Number keypad.

15.Within the keypad, enter a unique numeric value to be assigned to the port the VNC Web Server is running on. The default value is 5900.

16.Press Done when you are finished entering the value. The remaining fields within the G4 Web Control Settings section of this page are read-only and cannot be altered.

17.Press the Up/Down arrows on either sides of the G4 Web Control Timeout field to increase or decrease the amount of time the panel can remain idle (no cursor movements) before the session is closed and the user is disconnected.

18.Press the Back button to open the Protected Setup page.

19.Press the on-screen Reboot button to save any changes and restart the panel.

Verify your NetLinx Master’s IP Address and System Number have been properly entered into the Master Connection section of the System Connection page.

Accessing the NetLinx Master via an IP Address

Refer to your particular NetLinx Master’s instruction manual for detailed information on how to download the latest firmware (build 300 or higher) from www.amx.com. This firmware build enables SSL security and disables the ability to alter the Master security properties via a TELNET session.

Once the Master’s IP Address has been set through NetLinx Studio:

1.Launch your web browser.

2.Enter the IP Address of the target NetLinx Master (with either http or https) into your web browser’s Address field.

3.Click OK to accept the AMX SSL certificate (if SSL is enabled).

4.Enter a valid username and password into the fields within the Login dialog.

5.Press the Enter key on your keyboard to begin the communication process between the target Master and your PC.

6.The first window displayed (FIG. 67) is accessed by clicking on the Manage connections link. Once activated, this page displays links to G4 panels running the latest G4 Web Control feature.

7" Modero Widescreen Touch Panels 73