AMX NXT-CV7, NXD-CV7 instruction manual Installed prior to setting up a USB connection to the panel

Configuring Communication

This window notifies you that the panel has been detected by the PC as a USB-compliant device and the PC is installing an appropriate USB driver to establish a proper communication to the panel.

This driver was installed on your PC during the installation of the latest NetLinx Studio and TPDesign4 software application installations. These applications should be

installed prior to setting up a USB connection to the panel.

The driver does not contain a Microsoft® digital signature and Windows® then informs you of such.

9.Click Yes when told that a digital signature was not found. This action accepts the installation of the new AMX USB driver. The panel is now configured to communicate directly with the PC.

This process completes the association between driver and device.

Each time the same touch panel is connected to the computer the driver is automatically loaded (using a unique name - example USB LAN LINK #1, #2). Each time a different touch panel is connected to the computer, the previous procedures will need to be repeated.

10.Navigate back to the System Connection page.

Step 3: Confirm and View the current AMX USB device connections

The USB driver information can be confirmed via two different methods:

Via the Control panel (previous steps 1 and 2) or

Via the Unplug or Eject Hardware icon from the Taskbar.

1.Navigate to Start > Settings > Control Panel > and double-click the System icon to launch the System Properties dialog.

2.Select the Hardware tab and click on the Device Manager button to launch the Device Manager dialog.

Within the Device Manager dialog, the AMX USBLAN device appears under Network Adapters (FIG. 52) and has a unique name such as AMX USB LAN LINK #2. The number changes depending on which recognized panel is currently connected.

3.Confirm that a new USB detection icon (FIG. 53) appears in the lower-right taskbar on the PC display window.

4.Double-click on the icon to open the Unplug or Eject Hardware window and confirm the AMX USB LAN LINK has been installed and is operating properly.

7" Modero Widescreen Touch Panels 51