AMX NXT-CV7, NXD-CV7 instruction manual System Recovery, Slider

Firmware Pages and Descriptions

Protected Setup Page Elements (Cont.)

System Recovery:

Allows you to either reset the touch panel to factory default settings and/or wipe out all existing touch panel pages:

•The Reset System Settings button allows a user to wipe out all current configuration parameters on the touch panel (such as IP Addresses, Device Number assignments, Passwords, and other presets).

-Pressing this button launches a Confirmation dialog (FIG. 86) which asks you to confirm your selection.

-This dialog is configured with a delay timer that does not enable the YES button for 5 seconds. This delay provides an additional amount of time for the user to confirm their decision.

•The Remove User Pages button allows you remove all current TPD4 touch panel pages currently on the panel (including the pre-installed AMX Demo pages).

-Pressing this button launches a Confirmation dialog (FIG. 86) which asks you to confirm your selection.

-This dialog is configured with a delay timer that does not enable the YES button for 5 seconds. This delay provides an additional amount of time for the user to confirm their decision.

You have a wait time of 5 seconds before the YES option is enabled.

FIG. 86 Protected Setup page-System Recovery confirmation dialog

Channel Port

Channel Port		Channel Code
		Number
	3,132			Address
Level Port	Button			Port	Level Port
	2,8		3,50		Channel Code
Channel Code
				Address Code	Number
Number
				Number
FIG. 87 Button/slider Function Show example

7,10

Slider

4,9 1,8

Channel Code Number

Address

Port

Address Code Number

7" Modero Widescreen Touch Panels 99