Configuring Communication
74 7" Modero Widescreen Touch Panels
Using your NetLinx Master to Control the G4 panel
Once the Master’s IP Address has been set through NetLinx Studio (version 2.3 or higher):
1. Follow the procedures mentioned above to communicate to the target NetLinx Master through
an IP Address.
2. Enter a valid user name and password into the fields within the Login dialog.
3. Click OK to enter the information and proceed to the Master’s Manage WebControls window.
4. Press the Enter key on your keyboard to begin the communication process between the target
Master and your PC.
5. Click on the G4 panel name link associated with the target panel. A secondary web browser
window then appears on the screen (FIG. 68).
FIG. 67 WebControls window (populated with panels)
Compatible
devices field
G4 panels
Compression
Options
(showing G4
WebControl links)
If a Security Alert window appears on your computer screen, refer to the specific NetLinx Master
instruction manual for detailed information regarding this popup window. These steps are based on
a Master with proper security and SSL encryption enabled.
FIG. 68 Web Control VNC installation and Password entry screens