AMX NXT-CV7 Cont, Button Assignments, NXD-CV7 only, Operating / Storage, Environment

Introduction

Specifications for 7" Widescreen Video Touch Panels (Cont.)

Rear Panel Components	(Side panel location on NXD-Wall Mount panels)
(Cont.):
Audio/Video connector:	• RJ-45 connector for communication of differential audio/video signals
	to/from the touch panel (panel type dependant). This connector receives
	Composite video, Stereo (left/right) audio, and microphone audio.
	• Video is received via the NXA-AVB/ETHERNET Breakout Box. Configuring
	video windows for playback is done using TPDesign4.
	• In-bound audio (from the breakout box) gets directed to the speakers.
	• Out-bound audio is sent from the on-board microphone (on the
	front-panel). Selecting audio files for playback is configured through
	TPDesign4.
PWR connector:	• 2-pin 3.5 mm mini-Phoenix connector.
Button Assignments	Button assignments can only be adjusted in TPD4 and not on the panels.
(NXD-CV7 only):	• Button channel range: 1 - 4000 button push and feedback (per address port)
	• Button variable text range: 1 - 4000 (per address port)
	• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
	• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)
	• Address port range: 1 - 100
Operating / Storage	• Operating Temperature: 0° C (32° F) to 40° C (104° F)
Environment:	• Operating Humidity: 20% - 85% RH
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% - 85% RH
Included Accessories:	• Trim Ring with button openings (60-2258-16)
	(factory installed on NXD models only)
	• Trim Ring without button openings (60-2258-21) (NXD models only)
	• Installation Kit for 7" NXD panels (KA2258-02) includes:
	- One 2-pin 3.5 mm mini-Phoenix connector (41-5025)
	- Two Phillips-head screws (#4-40 x 0.250 Black) (80-0112)
	- Three Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
	• Installation Kit for 7" NXT panels (KA2258-01):
	- 2-pin 3.5 mm mini-Phoenix connector (41-5025)
	• Modero Table Top Cable (CA2250-50): provided with all NXT panels.
	• NXA-AVB/ETHERNET Breakout Box (FG2254-10): Provides video/audio
	distribution to the A/V panel over CAT5 cable (up to 200’/60.96m) and
	accepts either Composite or S-Video.
	- Although the CV7 is only sold as part of a KIT configuration, the breakout
	box can be purchased as a separate accessory.
Optional Accessories:	• CB-TP7 (FG035-10)
	- 7" metallic conduit box for Wall Mount installations.
	• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)
	• NXA-BASE/1 Battery Base Kit (FG2255-05K)
	- 1 battery base and 1 NXT-BP battery (NXT panels only)
	• NXA-RK7 (FG2904-53)
	- RackMount kit for 7" Wall Mount touch panels (NXD panels only).
	Kit includes eight #10-32 screws and washers.
	• NXA-WC80211B/CF (FG2255-03)
	- AMX 802.11B Compact Flash Wireless Network Card

7" Modero Widescreen Touch Panels 5