AMX NXD-CV7, NXT-CV7 instruction manual Video Setup Page Elements

Firmware Pages and Descriptions

The elements of the Video Setup page are described in the table below:

Video Setup Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).
Settings:	• The Default Settings button sets the video settings to their default values
	(indicated in this table).
	• The Undo Changes button disregards any changes made on the page since
	the last settings were saved.
	• The Save Settings button saves any changes made to this page.
Video Settings:	• The Black & White button toggles the Black & White display mode.
	Default = Off.
	• The Sharpness button toggles the Interpolate (Sharpness) feature.
	Default = Off.
	• The Interlace button toggles the Interlacing feature.
	Default = On.
Status:	Displays whether or not a video-sync signal is detected.
Format:	Allows you to press this blue field and cycle through a choice of available video
	formats (NTSC, PAL, SECAM, or Auto detect).
	• Default = Auto.
Brightness:	Use the UP/DN buttons to alter the brightness level of the incoming signal.
	• Range = 0 - 255, default = 128.
Contrast:	Use the UP/DN buttons to alter the contrast level of the incoming signal.
	• Range = 0 - 255, default = 128.
Saturation:	Use the UP/DN buttons to alter the color saturation level of the incoming signal.
	• Range = 0 - 255, default = 128.
Hue:	Use the UP/DN buttons to alter the hue level of the incoming signal.
	• Range = 0 - 255, default = 128.

94 7" Modero Widescreen Touch Panels