AMX instruction manual NXT-CV7 and NXD-CV7 front views

Introduction

Key features common to both panels include:

CV7 panels are based on the latest display technology and support AMX's 4th generation (G4) graphics which provide higher brightness, richer colors, and deeper contrast. The new G4 graphics technology is supported by the latest AMX TPDesign4 Touch Panel Design program (version 2.5 or higher).

CV7 panels display eye-catching images and full-motion video on a large 16:9 image format, while providing a wide 100-degree top-to-bottom viewing angle.

CV7 panels feature a front panel light sensor, motion sensor, IR receiver and a

Sleep/Setup Access combo button.

CV7 panels support AMX Computer Control, which enables remote viewing and control of any networked computer directly from the panel. This gives the user the ability to launch digital music from a PC, cruise the Internet, check and respond to

E-mail, open software files, and launch applications. Anything you can do on your PC can be accomplished through these panels.

The optional wireless solution includes an NXA-WC80211B/CF internal wireless interface card that allows the CV7 to communicate with a NetLinx Master via a standard 802.11b Wireless Access Point, and an NXA-BASE/1 battery base kit that allows the NXT to function off the charge from the included single NXT-BP battery.

CV7 panels feature programmable firmware that can be upgraded via either the Ethernet port, wireless interface card, or the mini-USB port.

NXT-CV7 NXD-CV7 (shown with Button Trim Ring installed)

base

Programmable

Sleep/Setup Access Button Buttons/LEDs

(1-3)

Sleep/Setup Access Button

Programmable

Buttons/LED

(4-6)

FIG. 2 NXT-CV7 and NXD-CV7 (front views)

The Button Trim Ring is factory installed only on the FG2259-02 and FG2259-03 panel models.

2 7" Modero Widescreen Touch Panels