AMX NXD-CV7, NXT-CV7 CV7 Panels - Connector Layout

Introduction

67" Modero Widescreen Touch Panels

CV7 Panels - Connector Layout

FIG. 3 shows the layout of the connectors (located on the rear of the base on the NXT and on the

left side panel of the NXD panels).

Specifications for 7" Widescreen Video Touch Panels (Cont.)

Optional Accessories:: • NXT-BP (FG2255-10)

- Battery pack for Table Top panels.

• NXT-CHG Kit (FG2250-50K)

- 1 battery charger and 2 NXT-BP batteries

• PSN2.8: Power Supply (FG423-17) with 3.5 mm mini-Phoenix connector

• PSN4.4: Power Supply (FG423-45) with 3.5 mm mini-Phoenix connector

• PSN6.5: Power Supply (FG423-41) with 3.5 mm mini-Phoenix connector

Upgrade Compact Flash (factory programmed with firmware):

NXA-CFSP128M - 128 MB Compact Flash card (FG2116-36)

NXA-CFSP256M - 256 MB Compact Flash card (FG2116-37)

NXA-CFSP512M - 512 MB Compact Flash card (FG2116-38)

NXA-CFSP1G - 1 GB Compact Flash card (FG2116-39)

It is recommended that firmware KIT files only be transferred over a direct USB

or Ethernet connection and only when the panel is connected to a power

supply. If battery power or wireless connection fails during a firmware upgrade,

the panel flash file system may become corrupted.

FIG. 3 Connector layout on the CV7 touch panels

PROGRAM ETHERNET

10/100

A L 12VDC

AUDIO / VIDEO

MOUSE

KEYBOARD / PWR

Audio-Video from

Ethernet (CAT5)

Power

Keyboard/Mouse

Mini-USB

NXA-AVB/ETHERNET (CAT5)

(Program)

(USB)

Stereo Output

NXT-CV7 - connectors located

on rear panel of the base

NXD-CV7 - connectors located

on left side panel

Contents

Main AMX Limited Warranty and Disclaimer FCC Information Federal Communications Commission (FCC) Statement FCC RF Radiation Exposure Statement Page Table of Contents Page Page Page Introduction Page CV7 Specifications Page Page CV7 Panels - Connector Layout CV7 Touch Panel Accessories NXA-AVB/ETHERNET Breakout Box (FG2254-10) NXA-AVB/ETHERNET Specifications (Cont.) Touch Panels NXD/T Video-capable Video In (BNC) NXA-AVB/ETHERNET The rear-panel wiring connections are described below (from left to right): Page Modero Table Top Cable (CA2250-50) Page Modero Table Top Cable Wiring Table NXA-WC80211B/CF 802.11b Wireless Card (FG2255-03) Page Page Page Page Page Page NXA-CFSP Compact Flash (2116-3x) NXT-BP Power Pack (FG2255-10) NXA-BASE/1 Battery Base Kit (FG2255-05K) Page Page NXT-CHG Battery Charger Kit (FG2255-50K) Page Page Page Installation Unpacking the Panel Installing the Internal Components Installing the No-Button Trim Ring Page Installing the Button Trim Ring Page Pre-Wall Installation of the Conduit Box Installation of an NXD Touch Panel Page Page Page Page Page Page Wiring Guidelines for the CV7 Panels Audio/Video RJ-45 Connections and Wiring 123 45 6 78 Ethernet 10/100 Base-T RJ-45 Connections and Wiring Audio/Video RJ-45 Pinout Information Ethernet RJ-45 Pinouts and Signals Connecting and Using USB Input Devices Page Panel Calibration Calibrating the Modero Panel Page Configuring Communication Modero Setup and System Connection Page Configuring and Using USB with a Virtual Master Page Page Page Page Page Secondary Connection Page - Wireless Access Overview Page Configuring a Wireless Network Access Step 1: Configure the Panels Wireless IP Settings Page Step 2: Configure the Cards Wireless Security Settings Page Page Page Page Configuring a Wired Ethernet Connection Step1: Configure the Panels Wired IP Settings Page Step 2: Choose a Master Connection Mode Setting Step 3: Configure an Ethernet Connection Type Page Page Page Page Using G4 Web Control to Interact with a G4 Panel Page Accessing the NetLinx Master via an IP Address Using your NetLinx Master to Control the G4 panel Page Page Upgrading Modero Firmware Upgrading the Modero Firmware via the USB port Page Page Page Upgrading the Modero Firmware via Ethernet (IP Address) Page Page Page Firmware Pages and Descriptions Setup Navigation Buttons Setup Page The elements of the Setup page are described in the table below: Setup Navigation Button Elements (Cont.) Setup Page Elements Connection Status Setup Page Elements (Cont.) Page The elements of the Panel Information page are described in the table below: Project Information Page Elements (Cont.) Panel Information Page Elements Panel Information Page Elements (Cont.) The elements of the Time & Date Setup page are described in the table below: The only way to modify a panels time, without altering the Master, is to use NetLinx Code. Time & Date Setup Page Elements The elements of the Volume page are described in the table below: Volume Page Elements Page The elements of the Video Setup page are described in the table below: Video Setup Page Elements Page Battery Base Page Elements (Cont.) Protected Setup Navigation Buttons Protected Setup Navigation Button Elements Protected Setup Page The elements of the Protected Setup page are described in the table below: Protected Setup Page Elements Protected Setup Page Elements (Cont.) Page Page The elements of the Sensor Setup page are described in the table below: Sensor Setup Page Elements Page Page Page The elements of the Secondary Connection page are described in the table below: Secondary Connection Page Elements Page Page Page Page System Connection Page Elements (Cont.) Page Programming These Page Commands are used in NetLinx Programming Language and are case insensitive. Button Assignments Page Co mmands These button assignments can only be adjusted in TPD4 and not on the panels themselves. "'@DPG-<popup page name>;<popup group name>'" SEND_COMMAND Panel,"'@DPG-Popup1;Group1'" "'@PDR-<popup page name>;<reset flag>'" SEND_COMMAND Panel,"'@PDR-Popup1;1'" "'@PHE-<popup page name>;<hide effect name>'" "'@PPA-<page name>'" SEND_COMMAND Panel,"'@PPA-Page1'" "'@PPF-<popup page name>;<page name>'" SEND_COMMAND Panel,"'@PPF-Popup1;Main'" SEND_COMMAND Panel,"'@PPF-Popup1'" "'@PPM-<popup page name>;<mode>'" SEND_COMMAND Panel,"'@PPM-Popup1;Modal'" SEND_COMMAND Panel,"'@PPM-Popup1;1'" "'@PPN-<popup page name>;<page name>'" SEND_COMMAND Panel,"'@PPN-Popup1;Main'" "'@PSE-<popup page name>;<show effect name>'" SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'" "'@PSP-<popup page name>;<x coordinate>,<y coordinate>'" SEND_COMMAND Panel,"'@PSP-Popup1;100,0'" "'@PST-<popup page name>;<show effect time>'" "'PPOF-<popup page name>;<page name>'" SEND_COMMAND Panel,"'PPOF-Popup1;Main'" SEND_COMMAND Panel,"'PPOF-Popup1'" "'PPOG-<popup page name>;<page name>'" SEND_COMMAND Panel,"'PPOG-Popup1;Main'" Programming Numbers RGB Values for all 88 Basic Colors (Cont.) RGB Values for all 88 Basic Colors (Cont.) Default Font Styles and ID Numbers Border Styles and Programming Numbers TPD4 Border Styles by Name TPD4 Border Styles by Name (Cont.) "^" Button Commands "^" Button Commands "'^ANI-<vt addr range>,<start state>,<end state>,<time>'" SEND_COMMAND Panel,"'^ANI-500,1,25,100'" "'^APF-<vt addr range>,<page flip action>,<page name>'" SEND COMMAND Panel,"'^APF-400,Stan,Main Page'" Page "'^BCT-<vt addr range>,<button states range>,<color SEND_COMMAND Panel,"'^BCT-500.504&510,1,12'" "'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1- 5><1-5><1-5>'" SEND_COMMAND Panel,"'^BDO-530,1&2,51432'" SEND_COMMAND Panel,"'^BDO-1,0,12345'" "'^BIM-<vt addr range>,<input mask>'" SEND_COMMAND Panel,"'^BIM-500,AAAAAAAAAA'" "'^BLN-<vt addr range>,<button states range>,<number of lines>'" SEND_COMMAND Panel,"'^BLN-500,55'" SEND_COMMAND Panel,"'^BMC-425,1,1,500,1,BR'" or SEND_COMMAND Panel,"'^BMC-425,1,1,500,1,%BR'" SEND_COMMAND Panel,"'^BMC- 150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'" "'^BMF-<vt addr range>,<button states range>,<data>'" SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue %CTBlack%Ptest.png'" "'^BMI-<vt addr range>,<button states range>,<mask image>'" SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'" "'^BML-<vt addr range>,<max length>'" SEND_COMMAND Panel,"'^BML-500,20'" "'^BMP-<vt addr range>,<button states range>,<name of bitmap/picture>'" "'^BNN-<vt addr range>,<network name>'" SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'" "'^BNT-<vt addr range>,<network port>'" SEND_COMMAND Panel,"'^BNT-973,5000'" "'^BOP-<vt addr range>,<button states range>,<button opacity>'" "'^BOR-<vt addr range>,<border style name or border SEND_COMMAND Panel,"'^BOR-500.504&510.515,10'" SEND_COMMAND Panel,"'^BOR-500.504&510,AMX Elite -M'" "'^BOS-<vt addr range>,<button states range>,<video state>'" SEND_COMMAND Panel,"'^BOS-500,1,1'" "'^BRD-<vt addr range>,<button states range>,<border SEND_COMMAND Panel,"'^BRD-500.504&510.515,1&2,Quad Line'" "'^BSF-<vt addr range>,<selection value>'" SEND_COMMAND Panel,"'^BSF-500,1'" "'^BSM-<vt addr range>'" "'^BVL-<vt addr range>,<connection>'" SEND_COMMAND Panel,"'^BVL-500,0'" "'^BVN-<vt addr range>,<network name>'" SEND_COMMAND Panel,"'^BVN-500,191.191.191.191'" "'^BVP-<vt addr range>,<network password>'" "'^CPF-<vt addr range>'" SEND_COMMAND Panel,"'^CPF-500'" "'^DFP-<vt addr range>,<actions>,<page name>'" SEND COMMAND Panel,"'^DPF-409,Prev'" "'^ENA-<vt addr range>,<command value>'" "'^GDI-<vt addr range>,<bargraph drag increment>'" SEND_COMMAND Panel,"'^GDI-7,128'" "'^GIV-<vt addr range>,<joystick axis to invert>'" SEND_COMMAND Panel,"'^GIV-500,3'" "'^GLH-<vt addr range>,<bargraph hi>'" "'^GRD-<vt addr range>,<bargraph ramp down time>'" SEND_COMMAND Panel,"'^GRD-500,200'" "'^GRU-<vt addr range>,<bargraph ramp up time>'" SEND_COMMAND Panel,"'^GRU-500,100'" "'^GSC-<vt addr range>,<color value>'" "'^ICO-<vt addr range>,<button states range>,<icon index>'" SEND_COMMAND Panel,"'^ICO-500.504&510.515,1&2,1'" "'^JSB-<vt addr range>,<button states range>,<new text SEND_COMMAND Panel,"'^JSB-500.504&510.515,1&2,1'" "'^JSI-<vt addr range>,<button states range>,<new icon "'^JST-<vt addr range>,<button states range>,<new text SEND_COMMAND Panel,"'^JST-500.504&510.515,1&2,1'" "'^MBT-<pass data>'" SEND COMMAND Panel,"'^MBT-1'" "'^MDC'" "'^TEC-<vt addr range>,<button states range>,<color SEND_COMMAND Panel,"'^TEC-500.504&510.515,1&2,12'" "'^TEF-<vt addr range>,<button states range>,<text effect SEND_COMMAND Panel,"'^TEF-500.504&510.515,1&2,Soft Drop Shadow 3'" "'^TXT-<vt addr range>,<button states range>,<new text>'" "'^UNI-<vt addr range>,<button states range>,<unicode text>'" SEND_COMMAND Panel,"'^UNI-500,1,0041'" SEND_COMMAND TP,"'^UNI-1,0,0041'" Text Effect Names Button Query Commands All custom events have the following 6 fields: Custom Event Fields Button Query Commands "'?BCB-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BCB-529,1'" "'?BCF-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BCF-529,1'" "'?BCT-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BCT-529,1'" "'?BMP-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BMP-529,1'" "'?BOP-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BOP-529,1'" "'?BRD-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BRD-529,1'" "'?BWW-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?BWW-529,1'" "'?FON-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?FON-529,1'" "'?ICO-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?ICO-529,1&2'" "'?JSB-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?JSB-529,1'" "'?JSI-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?JSI-529,1'" "'?JST-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?JST-529,1'" "'?TEC-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?TEC-529,1'" "'?TEF-<vt addr range>,<button states range>'" SEND COMMAND Panel,"'?TEF-529,1'" "'?TXT-<vt addr range>,<button states range>,<optional index>'" SEND COMMAND Panel,"'?TXT-529,1'" Panel Runtime Operations "'ABEEP'" SEND COMMAND Panel,"'ABEEP'" "'ADBEEP'" SEND COMMAND Panel,"'ADBEEP'" "'@AKP-<initial text>;<prompt text>'" SEND COMMAND Panel,"'@AKP-12345678;ENTER PASSWORD'" "'@AKR'" SEND COMMAND Panel,"'@AKR'" "'BEEP'" "'@EKP-<initial text>;<prompt text>'" SEND COMMAND Panel,"'@EKP-33333333;Enter Password'" "'PKEYP-<initial text>'" SEND COMMAND Panel,"'PKEYP-123456789'" "'@PKP-<initial text>;<prompt text>'" Page Input Commands These Send Commands are case insensitive. Input Commands "'^CAL'" SEND COMMAND Panel,"'^CAL'" "'^KPS-<pass data>'" Embedded codes The following is a list of G4 compatible embedded codes: Embedded Codes Panel Setup Commands These commands are case insensitive. Panel Setup Commands "'^MUT-<mute state>'" SEND_COMMAND Panel,"'^MUT-1''" "'@PWD-<page flip password>'" Dynamic Image Commands The following is a listing and descriptions of Dynamic Image Commands. Dynamic Image Commands "'^BBR-<vt addr range>,<button states range>,<resource SEND_COMMAND Panel,"'^BBR-700,1,Sports_Image'" "'^RFR-<resource name>'" Dynamic Image Commands (Cont.) "'^RAF-<resource name>,<data>'" SEND_COMMAND Panel,"'^RAF-New Image,%P0%HAMX.COM%ALab/ Test_file%Ftest.jpg'" Troubleshooting Troubleshooting Information Page Page Page Page Page Appendix Text Formatting Codes for Bargraphs/Joysticks Text Area Input Masking Page Page URL Resources