AMX NXD-CV7, NXT-CV7 instruction manual Removing the No-Button Trim Ring

Installation

CV7 Panel/enclosure

Button latch

Trim

Ring

Latches

Light Pipe latch (black)

Button and Light Pipe removal

(showing the internal surface of Faceplate)

No-Button Trim Ring

Faceplate (outside surface shown)

FIG. 32 Removing the No-Button Trim Ring

8.Gently insert the Button Trim Ring latches into their corresponding openings on the outer surface of the internal Faceplate (FIG. 33).

Button Trim Ring

Faceplate (outer surface shown)

Button openings

FIG. 33 Inserting the Button Trim RIng

9.Firmly press down around the Button Trim Ring until all of the latches are securely inserted into their openings on the Faceplate, and the Button Trim Ring is securely fastened. Verify the Button Trim Ring is firmly inserted onto the Faceplate and that there are no gaps between this Trim Ring and the outer surface of the Faceplate.

10.Place the Faceplate back onto the main NXD-CV7 unit. Make sure to align the Microphone, Light, and PIR Motion sensor locations on the main unit to their respective openings on the Faceplate assembly.

32 7" Modero Widescreen Touch Panels