AMX NXD-CV7, NXT-CV7 Protected Setup Page Elements, Device Number, Options, Reboot Panel

Firmware Pages and Descriptions

Protected Setup Page

The Protected Setup page (FIG. 85) centers around the properties used by the panel to properly communicate with the NetLinx Master. Enter the factory default password (1988) into the password keypad to access this page.

Provides access to the panel firmware pages by enabling the grey front setup access button:

- Setup page (after a 3 second press/hold)

- Calibration page (after a 6 second press/hold)

FIG. 85 Protected Setup page-showing default values

The elements of the Protected Setup page are described in the table below:

Protected Setup Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).
Device Number:	Opens a keypad that is used to set and display the current device number.
Options:	Allows you to select various touch panel features:
	• The Function Show button enables the display of the channel port and
	channel code in the top left corner of the button, the level port and level code
	in the bottom left corner, and the address port and address code in the
	bottom right corner (see FIG. 87 for an example of the function locations).
	• Use the Page Tracking button to toggle page tracking. When enabled, the
	touch panel sends page data back to the NetLinx Master, or vice versa
	depending on the touch panel settings.
	• Use the Telnet button to enable or disable the telnet server on the panel. This
	feature focuses on direct telnet communication to the panel.
	• Use the Front Button Setup Access button to activate the grey Front Setup
	Access button (located below the LCD) to access the firmware pages.
	- Default condition is On.
	- Press and hold this grey button for 3 seconds to access the Setup page.
	- Press and hold this grey button for 6 seconds to access the Calibration
	page.
Reboot Panel:	Pressing this button causes the panel to restart after saving any changes.

98 7" Modero Widescreen Touch Panels