Connecting to a Power Supply, Wrong PLUG?, Mains Lead

GROUND LIFT (IN)

gs VIDEO TRIGGER 1, gt VIDEO TRIGGER 2. The trigger outputs have different functions depending on how the ‘Video Status’ has been set (Screen Ctrl or SCART) in the ‘General Settings’ menu.

ZONE 2	1	2
VIDEO	MONITOR OUT
VIDEO
TRIGGERS
1/RGB 2/S-VIDEO		PROG

gsgt

SCART mode

1/RGB trigger output – connect to RGB SCART on your TV:

Connection	Function	Voltage

Tip	RGB mode select	RGB video = 1V (into 75Ω load)
		Composite video = 0V

Ring	RGB/composite	Video present, aspect 4:3 = 12V
	SCART input select	Video present, aspect 16:9 = 6V
	(CVBS status)	No video signal = 0V
	Aspect ratio 4:3/16:9

Sleeve	Ground	0V

2/S-video output – connect to S-video SCART (usually SCART no.

2) on your TV:

Connection	Function	Voltage

Tip	Video source	Any video source selected = 12V
	trigger*	No video source selected = 0V

Ring	S-video SCART	S-video present, aspect 4:3 = 12V
	input select (CVBS	S-video present, aspect 16:9 = 6V
	status)	No video signal = 0V
	Aspect ratio 4:3/16:9

Sleeve	Ground	0V

Notes on SCART mode

In SCART mode, seamless selection of composite, S-video and RGB A/V TV inputs is possible using the AV8.

When switched to a video source input, and the AV8 detects the presence of either an S-video or composite video signal, it sets either the S-video or the composite SCART input select lines high. If both signal types are detected on that source input, then only the S-video SCART input select line is set high.

If a high quality video source in RGB+Composite Syncs mode is allocated to an input, the AV8 will assume an RGB signal is present when syncs are detected on the composite input. In this case if only a composite video signal is present on the input the AV8 will detect this as an RGB+Composite Sync signal and display a blank screen, not the composite video signal.

Information on SCART wiring is provided in the back of this manual.

NOTE:When the ‘HQ Video’ line of the ‘General Settings’ page is set to ‘Component’ (rather than ‘RGB’), video trigger 1 behaves as listed in the table for Screen Ctrl mode.

Screen Ctrl mode

1/RGB trigger output:

Connection	Function	Voltage

Tip	Main zone on trigger	Main zone turned on = 12V
		Main zone turned off = 0V

Ring	Main zone on trigger	Main zone turned on = 12V
		Main zone turned off = 0V

Sleeve	Ground	0V

2/S-video output:

Connection	Function	Voltage

Tip	Video source	Any video source selected = 12V
	trigger *	No video source selected = 0V

Ring	Video source	Any video source selected = 12V
	trigger *	No video source selected = 0V	English

* Video source	trigger – This output	goes high when any video source
Sleeve	Ground	0V

in the main zone is selected. It can be used to initiate closing of curtains or dimming lights automatically.

Notes on Screen Ctrl mode

In Screen Ctrl mode, the video triggers behave differently. Both outputs of video trigger 1 double up the role of the 12V trigger output described earlier.They can be used to remotely switch on or off additional equipment such as power amplifiers.

CONNECTING TO A POWER SUPPLY

1 Power inlet. The AV8 has a universal input power supply that is compatible with mains voltages between 85VAC and 265VAC.

RS232

CONTROL

85 – 265VAC

MAX 40VA

GROUND

LIFT (IN)

2 button. In complex setups which involve satellite inputs or radio aerials, grounding the unit may increase the level of background hum or buzz in the loudspeakers, in which case press the GROUND LIFT button in to lift the signal ground from the chassis ground. DO NOT REMOVE the safety earth from the mains cable under any circumstances.

WRONG PLUG?

Check that the plug supplied with the unit fits your supply. If your mains plug is different, consult your Arcam dealer or Arcam Customer Support on +44 (0)1223 203200.

MAINS LEAD

The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer.

PLUGGING IN

Push the plug (IEC line socket) of the power cable supplied with the

unit into the power input socket (1) in the back of the unit. Make sure it is pushed in firmly.

Put the plug on the other end of the cable into your power supply socket and switch the socket on.

E-9

AV8 specifications

The Arcam AV8 is a high-performance audio-video receiver that has garnered attention for its exceptional sound quality and versatile features, making it a sought-after option for both audiophiles and home theater enthusiasts. Designed to provide an immersive viewing experience, the AV8 is equipped with a range of technologies that enhance its performance.

One of the standout features of the Arcam AV8 is its support for high-definition audio formats. The receiver can decode various lossless audio formats, including Dolby TrueHD and DTS-HD Master Audio, allowing users to experience studio-quality sound. This capability is complemented by its advanced digital signal processing, which ensures that the audio output is clear and dynamic, enhancing the overall entertainment experience.

The AV8 is built with an emphasis on connectivity and flexibility. It boasts multiple HDMI inputs and outputs, facilitating seamless connections to a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. With support for 4K video pass-through, the AV8 is future-proofed for high-definition content, ensuring compatibility with the latest video technologies.

Another notable aspect of the Arcam AV8 is its user-friendly interface. The receiver is equipped with an intuitive on-screen display that simplifies navigation and setup. Additionally, Arcam has incorporated room calibration technology, which analyzes the acoustic properties of the listening environment and adjusts the audio output accordingly. This feature allows for optimal sound reproduction, tailored to the specific characteristics of the room.

The build quality of the AV8 is exceptional; it features a robust chassis designed to minimize vibration and interference, ensuring high-fidelity sound reproduction. The receiver is designed for ease of use, with remote control functionality and smart home integration options, making it convenient to operate alongside other devices.

In summary, the Arcam AV8 is a powerful AV receiver that combines high-definition audio capabilities, extensive connectivity options, and user-friendly features. With its strong emphasis on sound quality and innovative technologies, it stands out in the competitive landscape of home theater equipment, catering to the discerning tastes of audio enthusiasts and casual users alike. Whether for music or movie playback, the AV8 offers a compelling solution for those seeking an elevated audio-visual experience.

Arcam AV8 manual Connecting to a Power Supply, Wrong PLUG?, Mains Lead, Plugging

Models: AV8