Avaya Mobile Headset Adapter properties

Configuring Local Menu options

•Changes have occurred regarding the provisioning of Bluetooth on the IP Deskphone 1150E. With UNIStim 3.1, the Bluetooth Setup page no longer provides the option to select Bluetooth headset as this choice is moved to the Headsets menu.

•Users of USB Audio, when connected to a BCM system, may experience constant beeping from the wireless headsets, if the user inadvertently hits a call control keys in error.

•For the Avaya USB Adapters, the firmware of this device must be V2.0.32 or later.

•For the Algo 4900 USB ATA, the firmware of this device must be v1.00.32 or later.

•The Algo 4900 USB ATA is classified as a high power USB device and must be connected to the phone through a powered USB hub.

•The Plantronics CS50-USB and CS60-USB must be AC-powered before connecting them to the phone.

•For the Plantronics CS50-USB and CS60-USB, ensure that the headset base is in ready mode (that is, the green LED on the right hand side of the headset cradle is solid) before using the headset.

•For the Plantronics CS50-USB and CS60-USB to go off hook, press the On Hook/Off Hook button for 3 seconds.

•At the time of this writing, GN Netcom produces four models of the Jabra GN9300 series headsets: Jabra GN9330, Jabra GN 9330E, Jabra GN 9350, and Jabra GN9350E. The USB Audio feature in the IP Deskphones only supports the Jabra GN9330E and Jabra GN9350E connected via USB.

•For the GN Netcom 9300 series, occasionally a single ring is lost between the phone and the headset but is recovered at the next ring.

•For the GN Netcom 9300 series, occasionally a drop in audio quality may be experienced when a 3-way conference is established.