![](/images/new-backgrounds/1326379/326379109x1.webp)
Using your Avaya 1120E IP Deskphone
1.Form a small bend in the cable.
2.Thread the adapter cord through the channels in the stand.
To use PoE, your connected LAN must support PoE. A
WARNING
If you are connected to a PoE connection do not use the AC power adapter
To use gigabit Ethernet, you must connect to the LAN through
Connecting the handset
Use the following procedure to connect the handset to the IP Deskphone.
1.Connect the end of the handset cable with a short straight section to the handset.
2.Connect the end of the handset cable with the long straight section, into the
3.Form a small bend in the cable.
4.Thread the handset cord through the channels in the stand so that it exits behind the handset on the right side, using the handset cord exit in the stand base marked with the + symbol as shown in Figure 11 on page 54.
55