Brother 1240, HL-1030, 1250 service manual Panel PCB Assy, Solenoid Assy

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

3.16Panel PCB ASSY

NOTE:

Be sure to remove the drive unit and disconnect the panel PCB connector on the engine PCB before removing the panel PCB ASSY.

(1)Remove the M3x6 Taptite screw, then remove the panel PCB ASSY.

Panel PCB

Taptite, cup M3x6

Fig. 4-57

3.17Solenoid ASSY

NOTE:

Be sure to remove the drive unit and disconnect the solenoid connector on the engine PCB before removing the solenoid ASSY.

(1)Place the main frame so that the drive unit side is at the top.

(2)Release the catch and remove the planetary gear from the paper pick-up roller shaft.

(3)Remove the planetary gear from the paper feed roller shaft and gear 56.

Planetary gear (for paper pick-up roller)

Gear 56

Main frame

Solenoid

(catch)

Planetary gear

(for paper pick-up roller)

Planetary gear

(for paper feed roller)

Fig. 4-58

4-33