CHAPTER 2 INSTALLATION AND BASIC OPERATION
CHAPTER2 INSTALLATION AND BASIC OPERATION
1.CONDITIONS REQUIRED FOR INSTALLATION
1.1Power Supply
•The source voltage must stay within ±10% of the rated voltage shown on the rating plate.
•The power cord, including extensions, should not exceed 5 meters (16.5 feet).
•Do no share the same power circuit with other
•Use a voltage regulator if the power source is not stable.
1.2Environment
•The printer should be installed near a power outlet, which is easily accessible.
•The room temperature is maintained between 10°C and 32.5°C. The relative humidity is maintained between 20% and 80%.
•The printer should be used in a well ventilation room.
•Place the printer on a flat, horizontal surface.
•Keep the printer clean. Do not place the printer in a dusty place.
•Do not place the printer where the ventilation hole of the printer is blocked. Keep approximately 100 mm (4 inches) between the ventilation hole and the wall.
•Do not place the printer where it is exposed to direct sunlight. Use a blind or a heavy curtain to protect the printer from direct sunlight when the printer is unavoidably set up near a window.
•Do not place the printer near devices that contain magnets or generate magnetic fields.
•Do not subject the printer to strong physical shocks or vibrations.
•Do not expose the printer to open flames or salty or corrosive gasses.
•Do not place objects on top of the printer.
•Do not place the printer near an air conditioner.
•Keep the printer horizontal when carrying.
•Do not cover the slots in the side cover.
1.3System Requirements for Brother Printer Solution for Windows
Check the following system requirements to setup and operate the printer using Brother Printing Solution for Windows :
•IBM PC or compatible with 80486 SX or higher microprocessor
•10MB of space available on your hard disk for the printer driver and all fonts.
•Microsoft Windows 3.1/3.11, Windows 95/98 or Windows NT 4.0
