Brother HL-1030, 1240, 1250 service manual COM10, Monarch

CHAPTER 1 GENERAL

The table below shows the print guaranteed areas for each paper size.

Size	A	B	C	D	E	F
	210.0 mm	297.0 mm	203.2 mm	288.5 mm	3.4 mm	4.23 mm
A 4	8.27”	11.69”	8.0”	11.36”	0.13”	0.17”
	(2,480 dots)	(3,507 dots)	(2,400 dots)	(3,407 dots)	(40 dots)	(50 dots)
	215.9 mm	279.4 mm	203.2 mm	270.9 mm	6.35 mm
Letter	8.5”	11.0”	8.0”	10.67”	0.25”	￿
	(2,550 dots)	(3,300 dots)	(2,400 dots)	(3,200 dots)	(75 dots)
	215.9 mm	355.6 mm	203.2 mm	347.1 mm
Legal	8.5”	14.0”	8.0”	13.67”	￿	￿
	(2,550 dots)	(4,200 dots)	(2,400 dots)	(4,100 dots)
	176.0 mm	250.0 mm	164.0 mm	241.5 mm
B 5 (ISO)	6.93”	9.84”	6.46”	9.5”	￿	￿
	(2,078 dots)	(2,952 dots)	(1,936 dots)	(2,852 dots)
	184.15 mm	266.7 mm	175.7 mm	258.2 mm	6.35 mm
Executive	7.25”	10.5”	6.92”	10.17”	0.25”	￿
	(2,175 dots)	(3,150 dots)	(2,025 dots)	(3,050 dots)	(75 dots)
	148.5 mm	210.0 mm	136.5 mm	201.5 mm	6.01 mm
A 5	5.85”	8.27”	5.37”	7.93”	0.24”	￿
	(1,754 dots)	(2,480 dots)	(1,612 dots)	(2,380 dots)	(71 dots)
	105.0 mm	148.5 mm	93.0 mm	140.0 mm
A 6	4.13”	5.85”	3.66”	5.51”	￿	￿
	(1,240 dots)	(1,754 dots)	(1,098 dots)	(1,654 dots)
Organizer	69.85 mm	116.0 mm	56.2 mm	107.5 mm	6.35 mm
	2.75”	4.57”	2.21”	4.23”	0.25”	￿
(J size)
	(825 dots)	(1,370 dots)	(675 dots)	(1,270 dots)	(75 dots)
Organizer	95.25 mm	171.45 mm	86.78 mm	162.98 mm
	3.75”	6.75”	3.42”	6.42”	￿	￿
(K size)
	(1,125 dots)	(2,025 dots)	(975 dots)	(1,925 dots)
Organizer	139.7 mm	215.9 mm	131.23 mm	207.43 mm
	5.5”	8.5”	5.17”	8.17”	￿	￿
(L size)
	(1,650 dots)	(2,550 dots)	(1,500 dots)	(2,450 dots)
	104.78 mm	241.3 mm	92.11 mm	232.8 mm
COM10	4.125”	9.5”	3.63”	9.16”	￿	￿
	(1,237 dots)	(2,850 dots)	(1,087 dots)	(2,750 dots)
	98.43 mm	190.5 mm	85.7 mm	182.0 mm
MONARCH	3.875”	7.5”	3.37”	7.16”	￿	￿
	(1,162 dots)	(2,250 dots)	(1,012 dots)	(2,150 dots)
	162 mm	229 mm	150.0 mm	220.5 mm	6.01 mm
C 5	6.38”	9.01”	5.9”	8.68”	0.24”	￿
	(1,913 dots)	(2,704 dots)	(1,771 dots)	(2,604 dots)	(71 dots)
	110 mm	220 mm	98.0 mm	211.5 mm
DL	4.33”	8.66”	3.86”	8.33”	￿	￿
	(1,299 dots)	(2,598 dots)	(1,157 dots)	(2,498 dots)

NOTE:

•The paper sizes indicated here should conform to the nominal dimensions specified by JIS.

•A4 paper must accommodate 80 characters printed in pica pitch (203.2 mm).

•The dot size is based on 300 dpi resolution.

•Organizer is not supported by any printer emulations (commands).

1-12