Brother 1250, HL-1030, 1240 service manual Heat roller bearing Washer Heat roller gear

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

(14)Lift and remove the heat roller. The heat roller gear will also come off.

(15)Remove the heat roller bearing from the left hand end of the heat roller. To remove the bearing at the gear side, first remove the two washers, then remove the bearing.

Heat roller bearing

Heat roller

Heat roller bearing

Washer

Heat roller gear

Washer

Fig. 4-39

!CAUTION:

Never touch the surface of the heat roller.

NOTE:

•When re-assembling the heat roller to the fixing unit frame, place the two projections at the right hand side of the roller onto the bosses on the frame as shown in the figure below.

Heat roller gear

(projection)

Heat roller bearing

Heat roller

(boss)

Fig. 4-40

4-22