Brother HL-1030, 1240, 1250 service manual Fixing unit frame First eject roller Idle gear

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

(22)Press the two catches holding the idle gear 13 to the frame and then remove the idle gear 13. Slide the first eject roller to the left until the slot in the roller shaft aligns with the slot in the frame and then remove the roller by pulling it forwards.

Fixing unit frame

First eject roller

Idle gear 13

Fig. 4-47

(23)Remove the eight eject pinch rollers and pinch springs by lifting them upwards until the springs release from the frame.

Fixing unit frame

Pinch spring

Eject pinch roller

Fig. 4-48

4-26