Brother HL-1030, 1240, 1250 service manual Heat roller gear Heat roller bearing Embossment

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

∙When re-assembling the heat roller bearing which is assembled at the heat roller gear side, fix the bearing onto the heat roller so that the embossment whose thickness is 0.5mm is at the top.

Heat roller gear	Heat roller bearing
	Heat roller

(embossment)

Fig. 4-41

∙When re-assembling the heat roller to the fixing unit frame, ensure you do not damage the heat roller with the four hooks on the fixing unit frame.

(hooks)

Heat roller

(hooks)

Fixing unit frame

Fig. 4-42

4-23