Brother HL-1030, 1240, 1250 service manual Taptite, Torx pan M3x8

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

NOTE:

When replacing/re-assembling the separation pad holder, remove the old grease and apply a suitable amount of grease referring to the figure below;

Paper pick-up roller

Paper cassette

Grease: Molykote PG-662 (1 rice-grain size)

Fig. 4-5

(3)Turn the paper cassette upside down, then remove the cassette cover film by peeling it carefully from the underside of the cassette.

(4)Remove the M3x8 Taptite screw and remove the paper cassette cover from the front of the cassette.

Cassette cover film

Taptite, TORX pan M3x8

Paper cassette

Paper cassette cover

Fig. 4-6

NOTE:

•'The cover film must not be reused after it has been removed. Always replace it with a new one.

•The screw securing the paper cassette cover indicated RED in the figure above is very special. When disassembling/re-assembling the screw, you need a special screw driver. Refer to the parts reference list.

4-5