APPENDIX
NOTE:
The descriptions printed in Print Configuration vary depending on the printer models or countries.
2.Test Print (for HL-1030 only)
(1)Turn on the power switch of the printer while pressing the printer control panel button.
(2)Release the panel button when the Drum LED comes on.
(3)Press the panel button again and release it when the Drum LED comes on.
(4)Print the Test Print page.
The page counter and drum counter are printed at the bottom of the Test Print. (Refer to the figure below.) Note that the drum counter is an actual page counter after a new drum unit is replaced, and may be different from the drum unit life shown in the drum life bar. For details, see Section 2 ‘How to Read the Drum Unit Life’.
<Sample -
Page counter and drum counter are printed here.
Fig. A-2
NOTE:
The descriptions printed in Test Print vary depending on the country.
