Brother 1240, HL-1030, 1250 service manual ➀ ➁

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

(17)Turn the cassette upside down and remove the one M3x8 Taptite screw to remove the side guide gear. Then remove the one friction spring.

(18)Remove the two side guide racks.

(19)Remove the paper indicator.

Taptite cup M3x8
Side guide gear
Friction spring	➁
	Side guide rack
	➀
➀

Side guide rack

Step (19)

➀ ➁

Paper indicator

Fig. 4-13

NOTE:

•When re-assembling the side guide racks, they should both be aligned so that the wide end of the racks are in line with the inside edge of the paper guide release slots in the cassette before refitting the spring and gear.

•When replacing/re-assembling the paper cassette, remove the old grease and apply a suitable amount of grease onto both sides of the paper cassette referring to the figure below;

Grease: Molykote PG-662 (1 sesame size)

Grease: Molykote PG-662 (1 sesame size)

Paper cassette

Fig. 4-14

4-9