Brother 1250, HL-1030, 1240 service manual Fig. A-7

APPENDIX

If the printer is connected to a parallel port, you can take the following steps;

(1)Open the Maintenance Information utility, then select ‘Get the Information’ in the menu.

(2)Select the LPT port you are using and click the OK button.

Fig. A-7

(3)Click the Exit button.

(4)The dialog box will appear and show the frequencies of drum unit change, toner cartridge change and paper jam.

Fig. A-8

Note that each maintenance information is counted under the conditions below;

Information	Conditions
Drum unit change	When drum unit life is 100 pages or more, and the drum counter is
	reset. (Maximum counter: 63)
Toner cartridge change	When the toner cartridge is replaced after a Toner Empty error is
	stored in NVRAM, then warming-up completes without a Toner
	Empty or Toner Low error being detected. (Maximum counter:
	127)
Paper jam	When a paper jam occurs. (Maximum counter: 2047)

A-10