Brother 1250, HL-1030, 1240 service manual Hooks Thermistor Fixing unit frame Taptite, cup M3x12

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

NOTE:

∙When re-assembling the pressure roller cleaner complete with the cleaner spring onto the fixing unit cover, ensure the direction of the roller is correct referring to the figure above.

∙Ensure also that the spring is seated correctly in the locating channel and does not protrude from either end.

(21)Release the thermistor harness from the hooks on the fixing unit frame and then remove the one M3x12 Taptite screw and remove the thermistor.

(hooks)

Thermistor

Fixing unit frame

Taptite, cup M3x12

Fig. 4-45

NOTE:

When re-assembling the thermistor to the fixing unit frame, ensure the direction of the thermistor is correct referring to the figure below;

Fixing unit frame

Thermistor

Taptite, cup M3x12

Fig. 4-46

4-25