Brother 1250, HL-1030, 1240 service manual Clutch lever spring For paper feed roller

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

(4) Release the catch and remove the clutch levers for the feed roller and pick-up roller.

Clutch lever spring	Clutch lever	Clutch lever
	(for paper feed roller)
		(for paper feed roller)
	Rod

Clutch lever (for paper pick-up roller)

Solenoid

Clutch lever

(for paper pick-up roller)

Main frame

Fig. 4-59

!CAUTION:

•When removing the clutch levers, the clutch lever spring may come off. Be sure not to lose it.

•When re-assembling the clutch lever for the paper feed roller, ensure that the U shaped groove of the lever is fitted onto the rod in the solenoid correctly referring to the figure above.

(5)Place the main frame the right way up and remove gear 59 if not removed earlier during fixing unit removal.

Gear 59

Main frame

Fig. 4-60

NOTE:

When re-assembling the solenoid, ensure you do not forget to refit gear 59.

4-34