CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

3.22Paper Feed Roller ASSY

NOTE:

Be sure to remove all the covers and the PCBs before removing the paper feed roller ASSY.

(1)Unhook the black plastic hook on the shaft to remove gear 21.

Gear 21

(hook)

Fig. 4-69

!CAUTION:

The plastic hook holding gear 21 will break easily if it is not fully released before the gear is pulled to remove it. Ensure that the hook is fully released BEFORE attempting to remove gear 21.

(2)Turn the main frame the right way up.

(3)Unhook the hook on the bearing, then slightly slide the paper feed roller ASSY to the drive unit side.

(4)Lift up and remove the paper feed roller with the bearing and joint and remove the bearing and joint from the paper feed roller ASSY.

Bearing

Paper feed roller ASSY

Joint

(hook)

Bearing

Fig. 4-70

4-39

Page 112
Image 112
Brother 1240, HL-1030, 1250 service manual Paper Feed Roller Assy