Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame to check the focus.
Press the pbutton to switch to the focus check display (p. 44).
A white frame will appear where the AF frame was when the focus was set.
A gray frame will appear on a face detected during playback.
The area within the orange frame appears magnified.
Switch frames.
Move the zoom lever toward k once.
The screen shown on the left will appear.
Press the m button to move to a different frame when multiple frames appear.
Change the magnification level or location.
Use the zoom lever to change the display size, and the opqr buttons to change the display position while checking the focus.
Press the n button to reset the display to Step 1.
The focus check display is not available for movies.
