Saving Your New Configuration
Saving Your New Configuration
CONFIG. CONTROL
* = Factory Default
Load Config.
Save Config.
1
2
3
4
5
6
7
8
Print Config.
Delete Config.
Config.
Protect Configs.
After changing all of the necessary parameters, it is recommended you save them as a configuration that can be stored and loaded later for future use. If you do not save your configuration before you power off the printer, all of your parameter changes will be erased. The Save Config. option allows you to save up to eight configurations to meet different print job requirements. Configurations 1 through 8 are empty until you save values to them using the Save Config. option. For example:
Config 1: Selects DP typeface, 10 cpi, 6 lpi
Config 2: Selects NLQ typeface, 12 cpi, 8 lpi
Once you have saved a configuration using this option, it will not be lost if you power off the printer. You can load a configuration for a specific print job (page 63). You can also modify and resave it. You may want to print your configurations and store them in a safe place, such as inside the printer cabinet.
NOTE: The Protect Configs. parameter must be set to disable before you may save a configuration. Once you save a configuration, the Protect Configs. parameter automatically returns to enable. Once you change active emulations, any changes to the previously selected emulation will be gone unless they have been saved.
57
