
Submenu
Page Format
(from page 78)
Margins
Left Margin 0* columns
Right Margin 0* columns
Bottom Margin 0* lines
Perforation
Skip
Disable* 1/2 inch 2/3 inch 5/6 inch 1 inch
* = Factory Default
| Form Length |
| Form Width |
|
|
|
|
|
|
| Abs. Length IN | Abs. Width IN | ||
| 11.0* inches | 13.6* inches | ||
|
| |||
| Abs. Length MM | Abs. Width MM | ||
| 279.4* millimeters | 345.4* millimeters | ||
|
| |||
| Funct. of Lines | Funct. of CPI | ||
| 66* lines | 136* Characters | ||
|
|
Printer Protocol
Select the LinePrinter+ protocol you wish to use. Refer to the LinePrinter Plus Programmer’s Reference Manual for more information.
Print Char Set
When this selection is displayed and the ENTER key is pressed, the current character set is printed.
CPI/LPI Select
This parameter lets you specify the characters per inch (cpi) and lines per inch (lpi) values.
Font Attributes
Typefaces
•Data Processing. A general purpose font printing out at 120 dpi horizontally and 72 dpi vertically. The width of the font will vary with each cpi.
•NLQ. A high quality font printing at 180 dpi horizontally and 96 dpi vertically. This font has serifs and the width of the font varies with the cpi.
•
79