Compaq P5000 Series setup guide Proprinter XL Emulation, Define CR Code, Auto LF, LinePrinter+

Chapter 4 LinePrinter+

Proprinter XL Emulation

Printer

Protocol

(from page 78)

Proprinter XL

* = Factory Default

Define CR

Code

CR = CR*

CR = CR + LF

Auto LF

Enable*

Disable

Define LF

Code

LF = LF*

LF = CR + LF

FFValid at

TOF

Enable*

Disable

Character Set

Code Page 437*

Code Page 850

OCR-A

OCR-B

Code Page 210

Code Page 220

Code Page 852

Code Page 855

Code Page 857

Code Page 862

Code Page 866

Lithuanian 1

Lithuanian 2

Hebrew New

Hebrew DEC

Hebrew Old

Latin 9 8859-15

Alt. Char Set

Set 1*

Set 2

20CPI

Condensed

Enable*

Disable

Define CR Code

This option controls the action of the printer when it receives a Carriage Return code (hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the host computer sends Line Feeds to the printer.

•CR = CR. Does not insert an extra Line Feed after each Carriage Return.

•CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.

Auto LF

This option defines the printer actions when print data is received past the forms width setting.

•Enable. Performs an automatic carriage return and line feed when data is received past the forms width.

•Disable. Discards any data past the forms width.

82