Compaq P5000 Series setup guide Format, Margins, Perforation Skip, Forms Length, Forms Width

Submenu

Page Format

Margins

•Right Margin. Set in columns. Column zero is defined as the far right edge of the page, and column numbering increments from right to left.

•Left Margin. Set in columns. Column zero is defined as the far left edge of the page, and column numbering increments from left to right.

•Bottom Margin. Defined in lines, starting from line zero at the bottom of the page and incrementing from the bottom up.

Perforation Skip

•Disable. Allows printing on page perforation.

•You may set up a skip-over margin of 1/2 inch, 2/3 inch, 5/6 inch, or 1 inch. For example, a skip-over margin of 1 inch allows a 1 inch margin at the bottom of the page.

Forms Length

Forms length is the number of lines that can be printed on a page. You can set forms length in inches, millimeters (mm) or as a function of the current LPI (lines per inch).

Forms Width

The forms width can be specified in inches, millimeters, or as a function of the current CPI (characters per inch). The forms width set should not exceed the actual paper width.

81