Table 2-1. D4 Token Table (continued)
Token | Setup Option | Description |
|
|
|
0224 | Embedded Video | Enables the onboard video controller as the primary |
| Controller | video device. |
0225 | Embedded Video | Disables the onboard video controller. |
| Controller |
|
022D | Boot Mode | Enables booting to Unified Extensible Firmware |
|
| Interface (UEFI) capable operating systems. |
022E | Boot Mode | Enables booting to legacy mode, ensures compatibility |
|
| with operating systems that do not support UEFI. |
0231 | Active Processor | Four cores of the processor are enabled This applies to |
| Cores | |
0232 | Active Processor | Two cores of the processor are enabled. This applies to |
| Cores | |
0233 | Active Processor | Single core of the processor is enabled. This applies to |
| Cores | |
024B | C States | When enabled, the processor can operate in all |
|
| available Power C States. (default) |
024C | C States | When disabled, there are no C states available for the |
|
| processor. |
024D | Pause on Errors | Enables the BIOS from prompting for F1/F2 on error. |
|
| BIOS pauses at F1/F2 prompt. |
024E | Pause on Errors | Disables the BIOS from prompting for F1/F2 on error. |
|
| BIOS pauses at F1/F2 prompt. |
024F | Quiet Boot | Enables the display of the splash or summary screen, |
|
| rather than the detail of the POST flow. |
0250 | Quiet Boot | Disables the display of the splash or summary screen. |
|
| The user is able to see the detail of the POST |
|
| messages. |
0251 | N/A | The NIC1 is used for PXE boot, followed by NIC2. |
0252 | N/A | The NIC2 is used for PXE boot, followed by NIC1. |
0254 | 3F8h/2F8h | Sets the back serial port address to 0x3F8 and internal |
|
| serial port address to 0x2F8 |
