Figure 3-33. Removing and Installing the MicroSD Card Reader Support Bracket
2
1
1 | M3 screws (2) | 2 | MicroSD card reader support |
|
|
| bracket |
Installing the MicroSD Card Reader Support Bracket
1Align the MicroSD card reader support bracket with the screw holes on the sled tray. See Figure
2Replace the two screws securing the MicroSD card reader support bracket. See Figure
3Replace the MicroSD card reader. See "Installing the MicroSD Card Reader" on page 175.
4If applicable, replace the mezzanine card. See "Installing the Infiniband Mezzanine Card" on page 169 or "Installing the 10 GbE Mezzanine Card" on page 172.
5If applicable, replace the RAID battery. See "Installing the RAID Battery" on page 161.
6Replace the front cover. See "Installing the Front Cover" on page 139.
7Replace the sled. See "Installing a Sled" on page 134.
Installing System Components