3Remove the internal hard-drives. See "Removing a Hard-Drive Carrier" on page 178.

4Remove the hard-drive tray. See "Removing the Hard-Drive Tray" on page 181.

5Press down the cable-locking tab and disconnect the power cable from the interposer extender. See Figure 3-37.

6Remove the two screws securing the interposer extender to the sled tray. See Figure 3-37.

7Grasp the interposer extender by its edges and carefully remove it from the system board connector.

8Lift the interposer extender out of the sled tray. See Figure 3-37.

Figure 3-37. Removing and Installing the Interposer Extender

123

1

M3 screws (2)

2

interposer extender

3 power cable

Installing System Components

183

Page 183
Image 183
Dell C8220 owner manual 183, Removing and Installing the Interposer Extender