Internal Hard-Drives

The sled supports up to two 2.5-inch hard-drives attached internally to the sled tray.

Removing a Hard-Drive Carrier

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.

CAUTION: Combining SATA and SAS hard-drives in the same sled configuration is not supported.

1Remove the sled from the enclosure. See "Removing a Sled" on page 133.

2Remove the back cover. See "Removing the Back Cover" on page 140.

3Loosen the thumbscrew securing the hard-drive carrier to the hard-drive bracket. See Figure 3-34.

4Slide and lift the hard-drive carrier out of the sled tray. See Figure 3-34.

Figure 3-34. Removing and Installing a Hard-Drive Carrier

1

2

178

Installing System Components

Page 178
Image 178
Dell C8220 owner manual Internal Hard-Drives, Removing a Hard-Drive Carrier, 178