Table 2-1. D4 Token Table (continued)
Token | Setup Option | Description |
|
|
|
48AB | Flow Control | Selects none as the flow control for console |
|
| redirection. |
48AC | Flow Control | Selects hardware as the flow control for console |
|
| redirection. |
48AD | Flow Control | Selects software as the flow control for console |
|
| redirection. |
48AE | Terminal Type | The BIOS console redirection, if enabled, operates in |
|
| VTUTF8 emulation model. See also tokens BFh, C0h, |
|
| and D7h. |
48AF | Disables | |
| Key Support | ANSI/VT100 terminals. |
48B0 | Enables | |
| Key Support | ANSI/VT100 terminals. |
48B1 | Event logging | Disables BIOS to log system events to BMC, errors |
|
| include ECC/PCI/PCIe/HT…etc. |
48B2 | Event logging | Enables BIOS to log system events to BMC, errors |
|
| include ECC/PCI/PCIe/HT…etc. |
48B3 | NMI on Error | Disables BIOS to generate NMI when PCIe |
|
| uncorrectable errors occur. |
48B4 | NMI on Error | Enables BIOS to generate NMI when PCIe |
|
| uncorrectable errors occur. |
48B5 | Memory | Indicates all DIMMs in the system are operating at |
| Operating Voltage | 1.25 volts. |
48C0 | Frequency Ratio | Sets frequency multiplier as maximum level. |
48C1 | Frequency Ratio | Downgrades frequency multiplier one level. |
48C2 | Frequency Ratio | Downgrades frequency multiplier two levels. |
48C3 | Frequency Ratio | Downgrades frequency multiplier three levels. |
48C8 | QPI Frequency | Sets the QPI frequency runs at maximum speed. |
48C9 | QPI Frequency | Sets the QPI frequency runs at 4.800GT. |
48CA | QPI Frequency | Sets the QPI frequency runs at 5.866GT. |
48CB | QPI Frequency | Sets the QPI frequency runs at 6.400GT. |