162 Installing System Components
Removing the RAID Battery Holder
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1
Remove the sled from the enclosure. See "Removing a Sled" on page 133.
2
Remove the front cover. See "Removing the Front Cover" on page138.
3
Remove the RAID battery. See "Removing the RAID Battery" on page159.
4
Remove the three screws and hex nuts securing the battery holder to the
mounting board. See Figure3-22.
5
Remove the battery holder. See Figure3-22.
Figure 3-22. Removing and Installing the Battery Holder
1 mounting board 2 M2 hex nuts (3)
3 M3 screws (3) 4 battery holder
12
3
4