5Lower the Infiniband mezzanine card assembly to the sled tray.
6Replace the two screws securing the Infiniband mezzanine card assembly to the sled tray. See Figure
7Replace the front cover. See "Installing the Front Cover" on page 139.
8Replace the sled. See "Installing a Sled" on page 134.
Removing the 10 GbE Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.
1Remove the sled from the enclosure. See "Removing a Sled" on page 133.
2Remove the front cover. See "Removing the Front Cover" on page 138.
3Remove the two screws securing the 10 GbE mezzanine card assembly to the sled tray. See Figure
4Lift the 10 GbE mezzanine card assembly out of the sled tray. See Figure
Figure 3-28. Removing and Installing the 10 GbE Mezzanine Card Assembly
170
Installing System Components