Table 2-1. D4 Token Table (continued)
Token | Setup Option | Description |
|
|
|
011B | SATA Port2 | Turns off the 3rd Serial ATA drive controller. |
011C | SATA Port2 | Enables BIOS support for the 3rd Serial ATA drive |
|
| controller (enabled if present, POST error appears if |
|
| not present). |
011D | SATA Port3 | Turns off the 4th Serial ATA drive controller. |
011E | SATA Port3 | Enables BIOS support for the 4th Serial ATA drive |
|
| controller (enabled if present, POST error appears if |
|
| not present). |
011F | SATA Port4 | Turns off the 5th Serial ATA drive controller. |
0120 | SATA Port4 | Enables BIOS support for the 5th Serial ATA drive |
|
| controller (enabled if present, POST error appears if |
|
| not present). |
0121 | SATA Port5 | Turns off the 6th Serial ATA drive controller. |
0122 | SATA Port5 | Enables BIOS support for the 6th Serial ATA drive |
|
| controller (enabled if present, POST error appears if |
|
| not present). |
0135 | Embedded SATA | Disables the SATA controller. This token applies to |
| Controller | the first onboard SATA controller. |
0137 | Embedded SATA | Enables the SATA controller to run in IDE mode. Sets |
| Controller | the device class code as IDE and uses PCI IRQ |
|
| (referred as Native mode). This token applies to the |
|
| first onboard SATA controller. |
0138 | Embedded SATA | Enables the SATA controller. Sets the device class |
| Controller | code as SATA and sets up the AHCI BARs and |
|
| registers. This token applies to the first onboard SATA |
|
| controller. |
0139 | Embedded SATA | Enables the SATA controller. Sets the device class |
| Controller | code as RAID and executes the RAID Option ROM. |
|
| This token applies to the first onboard SATA |
|
| controller. |
013E | Memory | When disabled, memory remapping relocates memory |
| Remapping | space behind PCI hole to the space above 4 GB. |
| (3GB~4GB) |
|
96
