Figure 3-10. Removing and Installing the Cooling Shroud

1

2

3

1

M3 screws (2)

2

cooling shroud

3 anchor tab

Installing the Cooling Shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.

CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data.

1Lower the cooling shroud to the sled tray. See Figure 3-10.

2Gently press the cooling shroud until the anchor tab snap securely into place. See Figure 3-10.

3Replace the two screws securing the cooling shroud to the sled tray. See Figure 3-10.

4Replace the sled. See "Installing a Sled" on page 134.

142

Installing System Components

Page 142
Image 142
Dell C8220 owner manual Installing the Cooling Shroud, 142