
Figure 3-32. Removing and Installing the MicroSD Card Reader
| 2 |
| 3 |
1 | 4 |
|
5
1 | MicroSD card reader cable | 2 | M3 screws (2) |
3 | MicroSD card slot | 4 | MicroSD card reader |
5 | MicroSD card reader connector |
|
|
Installing the MicroSD Card Reader
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.
1Place the MicroSD card reader on the MicroSD card reader support bracket. See Figure
2Replace the two screws securing the MicroSD card reader. See Figure
3Connect the MicroSD card reader cable to the MicroSD card reader. See Figure
4If applicable, install the MicroSD card. Hold the MicroSD card with the label side facing to the right and press the card into the slot to lock into place. See Figure
Installing System Components