
Figure 3-27. Removing and Installing the Infiniband Mezzanine Card
1
| 5 |
|
|
| 4 | 3 | 2 |
1 | Infiniband mezzanine card | 2 | M3 screws (3) |
3 | mezzanine card bridge board connector | 4 | QSFP cage 1 |
5 | QSFP cage 2 |
|
|
Installing the Infiniband Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.
1Align the Infiniband mezzanine card with the screw holes on the bracket. See Figure
2Replace the three screws securing the Infiniband mezzanine card to the bracket. See Figure
3Install the mezzanine card bridge board into the mezzanine slot on the Infiniband mezzanine card. See Figure
4Replace the screw securing the mezzanine card bridge board to the bracket. See Figure
Installing System Components