HP 1240 Fax maintain your hp fax, clean the glass

6

maintain your hp fax

maintain

The HP Fax requires little maintenance. Sometimes you might want to clean the glass and the white strip on back of the lid to remove surface dust and ensure that your copies and scans remain clear. You might also want to replace, align, or clean your print cartridges from time to time. This section provides instructions for keeping your HP Fax in top working condition. Perform these simple maintenance procedures as necessary.

This section contains the following topics:

•clean the glass on page 63

•clean the white strip on page 64

•clean the exterior on page 65

•work with print cartridges on page 65

•replace the telephone cord on page 72

•restore factory defaults on page 72

•set the scroll speed on page 73

•set the prompt delay time on page 73

•self-maintenance sounds on page 74

clean the glass

Dirty glass from dust, smudges, hair, and so on slows down performance and affects the accuracy of your copies.

1Turn off the HP Fax, unplug the power cord, and raise the scanner lid.

Note: Print all faxes that are in memory before unplugging the power cord. Faxes in memory will be lost when the power cord is unplugged. See reprint the faxes in memory on page 49.

63