HP 1240 Fax fax setup

fax setup

After completing all steps in the Setup Poster, use the instructions in this section to complete your fax setup. Please keep your Setup Poster for later use.

In this section, you will learn how to set up your HP Fax so that faxing works successfully with any equipment and services you might already have on the same telephone line as your HP Fax.

If you subscribe to Caller ID, refer to use caller ID on page 47 after you have completed this chapter.

Read at least through page 77 to determine what additional (if any) setup you need to do.

This section contains the following topics:

•faxing from a DSL line on page 76

•faxing with a PBX phone system or an ISDN line on page 77

•how to tell if the following instructions apply to you on page 77

•how to choose the right fax setup for your office on page 78

•select your fax setup case from this table on page 80

•case A: separate fax line (no voice calls received) on page 81

•case B: faxing with a distinctive ring service on the same line on page 82

•case C: shared voice/fax line on page 83

•case D: fax line shared with PC modem (no voice calls received) on page 84