HP 1240 Fax replace the telephone cord, restore factory defaults

chapter 6

7Clean only the contacts. Do not clean the nozzles.

maintain

Contacts

Nozzles - do not clean

8Place the print cartridge back into the carriage.

9Repeat if necessary for the other print cartridge.

10Close the print-carriage access door and plug in the HP Fax.

replace the telephone cord

In some countries/regions you must use a special telephone cord to connect your device to the telephone system.

Please check fax setup on page 75 to see if this applies to you.

restore factory defaults

You can restore the original factory settings to what they were when you purchased your HP Fax.

Note: Restoring the factory defaults will not change the date information you set, nor will it affect any changes you made to scan settings and the language and country/region settings.

You can perform this process from the front panel only.

1Press Setup.

2Press 5, then press 3.

This selects Tools and then selects Restore Factory Defaults.

Tools Menu

1:Clean Print Cartridge 2:Align Print Cartridge 3:Restore Factory Defaults 4:Reprint Faxes in Memory

The factory default settings are restored.

72 hp fax 1240 series