HP F2140, F2187, F2180, F2120, F2110 manual Label Description

Chapter 2

Label

1

2

3

4

5

Description

On button

Check Paper light

Check Print Cartridge light

Plain Paper Type light

Photo Paper Type light

The following table describes common situations and explains what the lights mean.

HP All-in-One overview

Light status	What it means
All lights are off.	The HP All-in-One is turned off. Press the On button to turn on the device.
The On light and one of the Paper	The HP All-in-One is ready for printing, scanning, or copying.
Type lights are on.
The On light is blinking.	The HP All-in-One is busy printing, scanning, copying, or aligning the
	print cartridges.
The On light blinks quickly for 3	You pressed a button while the HP All-in-One is already busy printing,
seconds and then is on steady.	scanning, copying, or aligning the print cartridges.
The On light blinks for 20 seconds	You pressed the Scan button and there was no response from the
and then is on steady.	computer.
The Check Paper light is blinking.	•	The HP All-in-One is out of paper.
	•	The HP All-in-One has a paper jam.
	•	The paper size setting does not match the paper size detected in the
		input tray.
The Check Print Cartridge light is	•	The print cartridge door is open.
blinking.	•	The print cartridges are missing or not seated correctly.
	•	The tape was not removed from the print cartridge.
	•	The print cartridge is not intended for use in this HP All-in-One.
	•	The print cartridge might be defective.
The On, Check Paper, and Check	Scanner failure.
Print Cartridge lights are blinking.	Turn off the HP All-in-One, then on again. If the problem persists, contact
	HP Support.
All lights are blinking.	The HP All-in-One has a fatal error.
	1.	Turn the HP All-in-One off.
	2.	Unplug the power cord.
	3.	Wait a minute, then plug the power cord back in.
	4.	Turn the HP All-in-One back on.
	If the problem persists, contact HP Support.

10 HP All-in-One overview