HP Networking TopTool Products Setting Security Policy for Selected Ports, Disable Port, 14-9

Setting Up Security for a Device

Setting Security Policy for Selected Ports

Figure 14-4. Setting the Thresholds for Trap Receivers

Disable Port

If the Disable Port parameter displays yes, the port may be disabled when an unrecognized address is received. Disabling the port depends on the Address Selection parameter that you have chosen. The settings First Heard and Assigned will disable the port if a new address is heard on that port. The port will not be disabled when a new address is learned if the setting is Continuous.

Setting Security Policy for Selected Ports

You can set the security policy port by port, or by selecting a group of ports. Select one port by clicking on the entry in the Port Security page. To select more than one port, you can Ctrl-click on each port you want to include, or to select a range of contiguous ports, click on the first port in the range, then shift-click on the last port to be included. Click the Set Security Policy for Selected Ports button. Select the parameters that you want to assign.

14-9